1 files changed, 0 insertions, 192 deletions

diff --git a/other/openssh-2.1.1p4/INSTALL b/other/openssh-2.1.1p4/INSTALL
deleted file mode 100644
index d95ea4e..0000000
--- a/other/openssh-2.1.1p4/INSTALL
+++ /dev/null
@@ -1,192 +0,0 @@
-1. Prerequisites
-----------------
-
-You will need working installations of Zlib and OpenSSL.
-
-Zlib:
-http://www.freesoftware.com/pub/infozip/zlib/
-
-OpenSSL 0.9.5a or greater:
-http://www.openssl.org/
-
-RPMs of OpenSSL are available at http://violet.ibs.com.au/openssh/files/support
-
-OpenSSH can utilise Pluggable Authentication Modules (PAM) if your system
-supports it. PAM is standard on Redhat and Debian Linux and on Solaris.
-
-PAM:
-http://www.kernel.org/pub/linux/libs/pam/
-
-If you wish to build the GNOME passphrase requester, you will need the GNOME
-libraries and headers.
-
-GNOME:
-http://www.gnome.org/
-
-Alternatively, Jim Knoble <jmknoble@pobox.com> has written an excellent X11
-passphrase requester. This is maintained separately at:
-
-http://www.ntrnet.net/~jmknoble/software/x11-ssh-askpass/index.html
-
-The Entropy Gathering Daemon (EGD) is supported if you have a system which
-lacks /dev/random and don't want to use OpenSSH's internal entropy collection.
-
-EGD:
-http://www.lothar.com/tech/crypto/
-
-GNU Make:
-ftp://ftp.gnu.org/gnu/make/
-
-OpenSSH has only been tested with GNU make. It may work with other
-'make' programs, but you are on your own.
-
-2. Building / Installation
---------------------------
-
-To install OpenSSH with default options:
-
-./configure
-make
-make install
-
-This will install the OpenSSH binaries in /usr/local/bin, configuration files
-in /usr/local/etc, the server in /usr/local/sbin, etc. To specify a different
-installation prefix, use the --prefix option to configure:
-
-./configure --prefix=/opt
-make
-make install
-
-Will install OpenSSH in /opt/{bin,etc,lib,sbin}. You can also override 
-specific paths, for example:
-
-./configure --prefix=/opt --sysconfdir=/etc/ssh
-make
-make install
-
-This will install the binaries in /opt/{bin,lib,sbin}, but will place the
-configuration files in /etc/ssh.
-
-If you are using PAM, you will need to manually install a PAM
-control file as "/etc/pam.d/sshd" (or wherever your system
-prefers to keep them). A generic PAM configuration is included as
-"contrib/sshd.pam.generic", you may need to edit it before using it on
-your system. If you are using a recent version of Redhat Linux, the
-config file in contrib/redhat/sshd.pam should be more useful. 
-Failure to install a valid PAM file may result in an inability to
-use password authentication.
-
-There are a few other options to the configure script:
-
---with-rsh=PATH allows you to specify the path to your rsh program. 
-Normally ./configure will search the current $PATH for 'rsh'. You 
-may need to specify this option if rsh is not in your path or has a
-different name.
-
---without-pam will disable PAM support. PAM is automatically detected 
-and switched on if found.
-
---enable-gnome-askpass will build the GNOME passphrase dialog. You
-need a working installation of GNOME, including the development
-headers, for this to work.
-
---with-random=/some/file allows you to specify an alternate source of
-random numbers (the default is /dev/urandom). Unless you are absolutely
-sure of what you are doing, it is best to leave this alone.
-
---with-egd-pool=/some/file allows you to enable Entropy Gathering
-Daemon support and to specify a EGD pool socket. Use this if your
-Unix lacks /dev/random and you don't want to use OpenSSH's builtin
-entropy collection support.
-
---with-lastlog=FILE will specify the location of the lastlog file. 
-./configure searches a few locations for lastlog, but may not find
-it if lastlog is installed in a different place.
-
---without-lastlog will disable lastlog support entirely.
-
---with-kerberos4=PATH will enable Kerberos IV support. You will need
-to have the Kerberos libraries and header files installed for this
-to work. Use the optional PATH argument to specify the root of your
-Kerberos installation.
-
---with-afs=PATH will enable AFS support. You will need to have the
-Kerberos IV and the AFS libraries and header files installed for this
-to work.  Use the optional PATH argument to specify the root of your
-AFS installation. AFS requires Kerberos support to be enabled.
-
---with-skey will enable S/Key one time password support. You will need
-the S/Key libraries and header files installed for this to work.
-
---with-tcp-wrappers will enable TCP Wrappers (/etc/hosts.allow|deny)
-support. You will need libwrap.a and tcpd.h installed.
-
---with-md5-passwords will enable the use of MD5 passwords. Enable this
-if your operating system uses MD5 passwords without using PAM.
-
---with-utmpx enables utmpx support. utmpx support is automatic for 
-some platforms.
-
---without-shadow disables shadow password support.
-
---with-ipaddr-display forces the use of a numeric IP address in the 
-$DISPLAY environment variable. Some broken systems need this.
-
---with-default-path=PATH allows you to specify a default $PATH for sessions
-started by sshd. This replaces the standard path entirely.
-
---with-pid-dir=PATH specifies the directory in which the ssh.pid file is
-created.
-
---with-xauth=PATH specifies the location of the xauth binary
-
---with-ipv4-default instructs OpenSSH to use IPv4 by default for new
-connections. Normally OpenSSH will try attempt to lookup both IPv6 and
-IPv4 addresses. On Linux/glibc-2.1.2 this causes long delays in name
-resolution. If this option is specified, you can still attempt to 
-connect to IPv6 addresses using the command line option '-6'.
-
---with-ssl-dir=DIR allows you to specify where your OpenSSL libraries
-are installed.
-
---with-4in6 Check for IPv4 in IPv6 mapped addresses and convert them to
-real (AF_INET) IPv4 addresses. Works around some quirks on Linux.
-
-If you need to pass special options to the compiler or linker, you
-can specify these as environment variables before running ./configure.
-For example:
-
-CFLAGS="-O -m486" LFLAGS="-s" LIBS="-lrubbish" LD="/usr/foo/ld" ./configure
-
-3. Configuration
-----------------
-
-The runtime configuration files are installed by in ${prefix}/etc or 
-whatever you specified as your --sysconfdir (/usr/local/etc by default).
-
-The default configuration should be instantly usable, though you should 
-review it to ensure that it matches your security requirements.
-
-To generate a host key, run "make host-key". Alternately you can do so
-manually using the following commands: 
-
-    ssh-keygen -b 1024 -f /etc/ssh/ssh_host_key -N ""
-    ssh-keygen -d -f /etc/ssh/ssh_host_dsa_key -N ""
-
-Replacing /etc/ssh with the correct path to the configuration directory.
-(${prefix}/etc or whatever you specified with --sysconfdir during 
-configuration)
-
-If you have configured OpenSSH with EGD support, ensure that EGD is
-running and has collected some Entropy.
-
-For more information on configuration, please refer to the manual pages 
-for sshd, ssh and ssh-agent.
-
-4. Problems?
-------------
-
-If you experience problems compiling, installing or running OpenSSH. 
-Please refer to the "reporting bugs" section of the webpage at
-http://www.openssh.com/
-